When there is a lint error the user gets the following cryptic message:
binman: Node '/path/to/some/node': Yamllint error: 18: comments
This isn't very helpful. Improve the message to tell the user that the
number is actually a line number and also tell the user in which file
they have to look.
Signed-off-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
The maximum frequency of the A53 CPU on the AM62 depends on the speed
grade of the SoC. However, this value is hardcoded in the DT for all
AM62 variants, potentially causing specifications to be exceeded. Moreover,
setting a common lower frequency for all variants increases boot time.
To prevent these issues, modify the DT at runtime from the R5 core to
adjust the A53 CPU frequency based on its speed grade.
Suggested-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Joao Paulo Goncalves <joao.goncalves@toradex.com>
AM62 SoC has multiple speed grades. Add function to return max A53 CPU
frequency based on grade. Fastest grade's max frequency also depends on
PMIC voltage, to simplify implementation use the smaller value.
Suggested-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Joao Paulo Goncalves <joao.goncalves@toradex.com>
Reduce tmp variable use and remove unnecessary type cast in
env_get_bootm_mapsize(). This aligns the env variable parsing
with env_get_bootm_low(). No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Change type of 'tmp' variable from phys_size_t to phys_addr_t and
rename it to 'low' to better describe what the variable represents,
which is either the bootm_low address from environment or start of
DRAM address.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reduce tmp variable use and remove unnecessary type cast in
env_get_bootm_size(). This aligns the env variable parsing
with env_get_bootm_low(). No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Change type of ulong env_get_bootm_low() to phys_addr_t env_get_bootm_low().
The PPC/LS systems already treat env_get_bootm_low() result as phys_addr_t,
while the function itself still returns ulong. This is potentially dangerous
on 64bit systems, where ulong might not be large enough to hold the content
of "bootm_low" environment variable. Fix it by using phys_addr_t, similar to
what env_get_bootm_size() does, which returns phys_size_t .
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reported-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Simon Glass <sjg@chromium.org> says:
This little series reprises the EFI-video fix, fixes a USB problem and
enables a boot script for coreboot.
It also moves to truetype fonts for coreboot and qemu-x86, since the
menus look much better and there are no strong size constraints.
With these changes it is possible to boot a Linux distro automatically
with U-Boot on x86, including when U-Boot is the second-stage
bootloader.
Enable this feature to provide a larger font choice and more attractive
menus. Expand the ROM for x86_64 to 2MB to make space for the font.
Signed-off-by: Simon Glass <sjg@chromium.org>
This is needed to support Truetype fonts. In any case, the compiler
expects SSE to be available in 64-bit mode. Provide an option to enable
SSE so that hardware floating-point arithmetic works.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Suggested-by: Bin Meng <bmeng.cn@gmail.com>
Saving and restoring entries is used for expo and for the command line,
which we don't use in SPL. Drop these methods.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anatolij Gustschin <agust@denx.de>
The ANSI codes are not correctly handled at present, in that the
requested X position is added to the current one.
Correct this and also call vidconsole_entry_start() to start a new text
line.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>
Provide the user with a list of available boot options. Selecting one
causes it to be booted. Pressing <ESC> causes U-Boot to return to the
command-line prompt.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Simon Glass <sjg@chromium.org> says:
This series is the culmanation of the current line of refactoring
series. It adjusts pxe to call the booting functionality directly
rather than going through the command-line interface.
With this is is possible to boot using the extlinux bootmeth without
the command line enabled.
It also updates fastboot to do a similar thing.
Use zboot_run() to boot rather than the command line. This allows
extlinux to be used (on x86) without CMDLINE being enabled.
Collect any error but do not return it, to match the existing code.
Signed-off-by: Simon Glass <sjg@chromium.org>
Use bootm_run() and booti_run() to boot rather than the command line.
This allows extlinux to be used without CMDLINE being enabled.
Collect any error but do not return it, to match the existing code.
Signed-off-by: Simon Glass <sjg@chromium.org>
This code undertakes a separate task from the main logic of
label_run_boot() so move it into its own function.
Signed-off-by: Simon Glass <sjg@chromium.org>
The bootm_argv[3] expression is used in many places. It is the FDT
address, so use that name throughout.
Assign it to bootm_argv[3] only at the end, when all the conditions are
resolved.
Signed-off-by: Simon Glass <sjg@chromium.org>
This function is far too long and complicated. Split out the part
which actually calls the boot commands into a separate function.
Change a strncpy() to strlcpy() to keep checkpatch happy.
No functional change is intended.
Signed-off-by: Simon Glass <sjg@chromium.org>
It is possible to boot a kernel without CMDLINE being enabled. Update
the implementation to handle this, and drop the condition from the
FASTBOOT config.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Given the name of this variable, it should be an address, not a
pointer. Update this, to make it easier to use with sandbox.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Dmitrii Merkurev <dimorinny@google.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> # on vim3
Use the new CONFIG_BOOTM symbol to determine whether SYS_BOOT_LEN is
visible or not, since we want to support decompression when CMDLINE is
disabled.
Signed-off-by: Simon Glass <sjg@chromium.org>
Allow these functions to be compiled in when CONFIG_BOOTM is enabled,
even if CONFIG_CMD_BOOTM is not.
Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Angelo Dureghello <angelo@kernel-space.org>
Booting an OS does not require the 'bootm' command, so change the
condition for these options.
Move them into boot/ so they don't depend on CMDLINE
Note that CMD_BOOTM_PRE_LOAD has been put directly into the bootm code
so will need some additional refactoring (and a test!) to allow it to
change over.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Create a separate Kconfig option which enables the bootm logic,
separate from the 'bootm' command. This will eventually allow booting
without CMDLINE enabled.
Update boards which disable CMD_BOOTM to disable BOOTM instead, since
CMD_BOOTM now depends on BOOTM
Signed-off-by: Simon Glass <sjg@chromium.org>
The boot menu shows Android first and then a timestamp option. Move
these later since they are less commonly used.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass <sjg@chromium.org> says:
This series refactors the zboot code to allow it to be used with
CONFIG_COMMAND disabled.
A new zboot_run() function is used to boot a zimage.
The current use case (ChromeOS) is the uncommon case. Document how this
function is more normally used, where base is 0 and cmdline is NULL
Signed-off-by: Simon Glass <sjg@chromium.org>
Now that we have a function to start the process of booting a zimage,
use it in zboot_run() to avoid duplicated logic.
Signed-off-by: Simon Glass <sjg@chromium.org>
Move zboot_start() and zboot_info() in with the other logic functions.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
The term 'start' is used withint bootm and zboot to indicate the first
phase of booting an image.
Since zboot_start() does the whole boot, rename it to zboot_run() to
align with bootm_run() etc.
Fix a log message while we are here.
Signed-off-by: Simon Glass <sjg@chromium.org>
Process the arguments before calling zboot_start() so that we can
separate the command line from the internal logic.
Signed-off-by: Simon Glass <sjg@chromium.org>
The only difference between the command and the underlying logic is the
setting of envrionment variables. Move this out of the command
processing since it needs to be done in any case.
Signed-off-by: Simon Glass <sjg@chromium.org>
Separate out the commands from the logic. This will eventually allow
the logic to be used when CONFIG_CMDLINE is not enabled.
Signed-off-by: Simon Glass <sjg@chromium.org>
Drop the iteration and write out each state in full. This will allow
the arguments to be reduced and adjusted in future patches.
Signed-off-by: Simon Glass <sjg@chromium.org>
Most of the functionality of zboot is contained in the logic which
handles a zimage. Create a separate Kconfig for the logic so that it can
(later) be used without the command itself being enabled.
Enable ZBOOT by default on x86, with the command depending on that. The
existing 'imply' can therefore be removed.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
