Enable MMC subsystem and DW MMC driver support to make eMMC functional.
Also enable a couple of related commands so the user can make use of
eMMC from U-Boot shell.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Upstream properties were added to device trees to follow current Linux
kernel. DW MMC driver was updated accordingly. Safely remove outdated
MMC properties. Details on removed properties are as follows:
* samsung,removable: replaced by non-removable
* samsung,bus-width: replaced by bus-width
* samsung,timing:
- replaced by samsung,dw-mshc-ciu-div and samsung,dw-mshc-sdr-timing
in dw_mmc nodes
- removed from sdhci nodes (it's neither described in bindings, nor
it's used in s5p_sdhci.c driver)
* fifoth_val: replaced by fifo-depth
* bus_hz: replaced by clock-frequency
* div: the fixed CIU clock divider value was moved to the chip data in
exynos_dw_mmc.c driver
No functional change.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Fix most of checkpatch warnings and other obvious style issues.
No functional change.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Reduce U-Boot footprint by reusing dev->name as a driver's displayed
name. This changes boot device name (and "mmc info" output) from "EXYNOS
DWMMC" to something like "mmc@12100000".
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
add_dwmci() is already calling dwmci_setup_cfg() internally, there is no
needed to call dwmci_setup_cfg() again in case when add_dwmci() is used
(for non-DM cases). Fix it by calling dwmci_setup_cfg() only in DM
cases, when add_dwmci() wasn't called. Also, this assignment:
host->mmc = &plat->mmc;
is wrong in non-DM case when add_dwmci() was called, as it's creating
mmc object internally. Fix that by pulling that assignment into DM case,
when add_dwmci() isn't called.
While at it, add also this missing assignment:
host->mmc->dev = dev;
Fixes: 3537ee879e ("mmc: exynos_dw_mmc: support the Driver mode for Exynos")
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
There is no logical sense to split the initialization code between
multiple functions. Pull both do_dwmci_init() and
exynos_dwmci_core_init() into exynos_dwmmc_probe() to make the code more
simple and obvious.
No functional change.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Add the compatible entry and corresponding chip data for Exynos7
compatible chips, which covers modern ARM64 based Exynos chips. They
have some differences w.r.t. old ARM32 Exynos chips:
- CLKSEL register offset is different
- 64-bit IDMAC descriptor and 64-bit IDMAC registers are used
(implemented in dw_mmc core driver)
In terms of the driver implementation, the CIU clock is obtained via CCF
framework (as opposed to ad-hoc clock driver implementation for ARM32
chips).
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
By now exynos_dw_mmc driver was relying on the correct CIU clock
frequency being set on driver init. But dw_mmc core is actually trying
to change CIU clock rate dynamically, on init and in set_ios() callback,
which it's requesting via host->get_mmc_clk() callback (the name is
misleading: although it's called "get_mmc_clk()", it can actually
request both get and set operations). Implement setting the requested
rate for CIU clock in Exynos driver to achieve the correct dw_mmc core
driver operation at all times. DDR mode requires the clock to be twice
as fast (when 8 bit bus is used), so handle this too, to make DDR
function properly.
This change makes the eMMC throughput on E850-96 board twice as fast.
That's because "clock-frequency" is set to 800 MHz in E850-96 device
tree, but for DDR52 mode it should be 416 MHz (and TRM states it should
be 400 MHz for DDR50/8bit mode). The dw_mmc core is requesting 52 MHz
bus_hz for DDR52 mode, and DDR+8bit mode means it should be x2 fast, so:
f_ciu = 2 * ciu_div * f_bus = 2 * 4 * 52e6 = 416 MHz,
where f_ciu - freq of clock fed to DW MMC block from CMU (SDCLKIN), Hz
f_bus - freq of clock fed to the card (CCLKIN), Hz
ciu_div - value of internal divider (in DW MMC block).
Another way to work that around would be overriding the
"clock-frequency" property in corresponding dts. But setting the clock
frequency dynamically as it's done here looks much neater.
This implementation follows what's done in Linux kernel dw_mmc-exynos
driver in .set_ios() callback for MMC_TIMING_MMC_DDR52 case.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
DDR timing values should be defined in "samsung,dw-mshc-ddr-timing" dts
property, and used when DDR MMC mode is selected. Read that value from
dts and use it. If it's not available, use SDR timing values instead.
This change is following upstream Linux kernel implementation.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
host->quirks field is only used internally in exynos_dw_mmc.c driver.
To avoid cluttering the scope of struct dwmci_host, move quirks field
into Exynos driver's chip data, where it can be statically defined.
No functional change.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Instead of using non-standard "bus_hz" dts property, read common
"clock-frequency" property used in upstream Linux kernel. It's safe to
do so, as "clock-frequency" property was already added to corresponding
nodes in all affected Exynos device tree files.
No functional change.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Instead of using non-standard "samsung,bus-width" dts property, read
common "bus-width" property used in upstream Linux kernel. It's safe to
do so, as "bus-width" property was already added to corresponding nodes
in all affected Exynos device tree files.
No functional change.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Some chips like Exynos4412 have fixed internal CIU clock divider.
Instead of reading it from non-standard "div" dts property, store its
value in the driver internally, in static chip data associated with
corresponding compatible. This makes it possible to avoid using
host->div for storing it, so the latter can be removed safely. Also
create a helper function called exynos_dwmmc_get_ciu_div() for getting
the current div value: in case the fixed div is provided in the chip
data it will be used, otherwise the current div value is being read from
CLKSEL register.
The insights for this change were taken from dw_mmc-exynos.c driver in
Linux kernel.
No functional change.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
CLKSEL register offset may vary between different Exynos chips, e.g. on
ARM64 vs ARM32 chips. Provide a way to specify its offset value for each
compatible instead of hard-coding its value in read/write calls.
No functional change.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
The obsolete "samsung,timing" dts property is now split into
"samsung,dw-mshc-ciu-div" (for holding the internal DW MMC divider
value) and "samsung,dw-mshc-sdr-timing" (for actual timing values) in
upstream Linux kernel. Rework the driver to make use of new properties
instead of the old one. All affected dts files were already updated
accordingly.
No functional change.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Update the driver to use livetree API instead of FDT one.
No functional change.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
exynos_dwmci_get_config() is called from the probe function and used to
read data from device tree. Make use of .of_to_plat driver callback
instead, and convert exynos_dwmci_get_config() to match its signature.
No functional change.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
New Exynos chips should implement clock drivers using CCF framework. In
that case corresponding CCF functions can be used to get/set the clock
rates. Moreover, already existing get_mmc_clk() and set_mmc_clk() calls
are only implemented for CONFIG_CPU_V7A (i.e. ARM32 chips). In case of
ARM64 chips that config option is not defined, so build will crash on
linking stage, with errors like these:
ld: drivers/mmc/exynos_dw_mmc.o:
in function `exynos_dwmci_get_sclk':
undefined reference to `get_mmc_clk'
ld: drivers/mmc/exynos_dw_mmc.o:
in function `exynos_dwmci_set_sclk':
undefined reference to `set_mmc_clk'
Fix that issue by using CCF clocks API on ARM64 platforms for getting
and setting the source clock (sclk = SDCLKIN = CIU) rate. To implement
this, first extract the existing ARM32 clock control code into helper
functions with more generic signatures to abstract getting/setting the
sclk rate. Then add CCF clock support to those functions for ARM64
platforms.
Fixes: a082a2dde0 ("EXYNOS5: DWMMC: Added FDT support for DWMMC")
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Pinmux configuration on ARM64 platforms must be performed during startup
in pinctrl driver using info from device tree. exynos_pinmux_config()
and pinmux_decode_periph_id() are only available on ARM32 platforms, so
don't call those functions on ARM64 platforms. Instead of the latter
function, use "non-removable" property from device tree to derive the
dev_index value.
This fixes next linking errors on ARM64 platforms:
ld: drivers/mmc/exynos_dw_mmc.o:
in function `exynos_dwmci_get_config':
undefined reference to `pinmux_decode_periph_id'
ld: drivers/mmc/exynos_dw_mmc.o:
in function `do_dwmci_init':
undefined reference to `exynos_pinmux_config'
Fixes: a082a2dde0 ("EXYNOS5: DWMMC: Added FDT support for DWMMC")
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
In case of CONFIG_DM_MMC, host->priv actually holds (struct udevice *),
and not (struct dwmci_exynos_priv_data *). This makes *priv pointer
invalid and may lead to Synchronous Abort during its dereference later
in exynos_dwmci_board_init(). Fix it by extracting
exynos_dwmmc_get_priv() helper from exynos_dwmci_clksel() and using it
for getting the private data in exynos_dwmci_board_init()
Fixes: 3537ee879e ("mmc: exynos_dw_mmc: support the Driver mode for Exynos")
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Getting the base address with outdated fdtdec_get_addr() API and further
casting it to (void *) leads to next build warning on ARM64 platforms:
In function 'exynos_dwmci_get_config':
warning: cast to pointer from integer of different size
[-Wint-to-pointer-cast]
host->ioaddr = (void *)base;
Use livetree API instead (dev_read_addr_ptr()), which handles this
correctly.
Fixes: a082a2dde0 ("EXYNOS5: DWMMC: Added FDT support for DWMMC")
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Update the bindings doc for Exynos DW MMC block to follow the upstream
example and reflect the latest changes made in corresponding Linux
kernel bindings.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Some device tree properties for DW MMC block were updated in Linux
kernel. Let's follow its example and rework corresponding properties in
all Exynos device trees. Don't remove outdated properties yet, it'll be
done later once DW MMC driver is updated accordingly to read the updated
properties instead of outdated ones.
Next properties are added:
* samsung,dw-mshc-ciu-div and samsung,dw-mshc-sdr-timing:
They were derived from outdated samsung,timing property.
* fifo-depth (generic replacement for fifoth_val):
FIFO depth was calculated from fifoth_val (using expressions from
FIFOTH register description in TRM):
fifo-depth = ((fifoth_val >> 16) + 1) * 2
* bus-width: generic replacement for samsung,bus-width
* clock-frequency: generic replacement for bus_hz
* non-removable: generic replacement for samsung,removable = <0>
No functional change.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Rework kernel-doc comments in dwmmc.h header so it's actually possible
to generate a proper documentation from it usin scripts/kernel-doc
script, with no errors.
No functional change.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Replace fifoth_val property with its fifo-depth counterpart in all DW
MMC drivers. fifo-depth is a common property used in upstream Linux
kernel. The FIFOTH register value will be calculated using fifo-depth
value in DW MMC core (dw_mmc.c). This change reduces code duplication in
platform drivers, and pulls common FIFOTH register value calculation
into core dw_mmc driver where it belongs.
No functional change.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Some DW MMC blocks (e.g. those on modern Exynos chips) support 64-bit
DMA addressing mode. 64-bit DW MMC variants differ from their 32-bit
counterparts:
- the register layout is a bit different (because there are additional
IDMAC registers present for storing upper part of 64-bit addresses)
- DMA descriptor structure is bigger and different from 32-bit one
Introduce all necessary changes to enable support for 64-bit DMA capable
DW MMC blocks. Next changes were made:
1. Check which DMA address mode is supported in current IP-core
version. HCON register (bit 27) indicates whether it's 32-bit or
64-bit addressing. Add boolean .dma_64bit_address field to struct
dwmci_host and store the result there. dwmci_init_dma() function is
introduced for doing so, which is called on driver's init.
2. Add 64-bit DMA descriptor (struct dwmci_idmac64) and use it in
dwmci_prepare_desc() in case if .dma_64bit_address field is true.
A new dwmci_set_idma_desc64() function was added for populating that
descriptor.
3. Add registers for 64-bit DMA capable blocks. To make the access to
IDMAC registers universal between 32-bit / 64-bit cases, a new
struct dwmci_idmac_regs (and corresponding host->regs field) was
introduced, which abstracts the hardware by being set to
appropriate offset constants on init. All direct calls to IDMAC
registers were correspondingly replaced by accessing host->regs.
4. Allocate and use 64-bit DMA descriptors buffer in case when IDMAC
is 64-bit capable. Extract all the code (except for the IDMAC
descriptors buffer allocation) from dwmci_send_cmd() to
dwmci_send_cmd_common(), so that it's possible to keep IDMAC
buffer (either 32-bit or 64-bit) on stack during send_cmd routine.
The insights for this implementation were taken from Linux kernel DW MMC
driver.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Prepare for adding 64-bit IDMAC descriptors by renaming current 32-bit
descriptor and its fields accordingly. While at it, make use of
virt_to_phys() to make it more obvious in which places the physical
addresses have to be used.
No functional change.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Make dwmci_prepare_data() function easier to read by extracting the
preparation of IDMAC descriptor into a dedicated function.
No functional change.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Make dwmci_send_cmd() easier to read by moving the DMA transfer handling
code into a dedicated function.
No functional change.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
FIFO data transfer is implemented as quite a massive chunk of code.
Extract it into a dedicated function to make dwmci_data_transfer()
easier to read and reduce the indentation level of the code.
No functional change.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Extract the clock divider update into dwmci_update_div() function. It's
a procedure recommended in TRM, so it's better to keep it in a dedicated
function to make the code clearer.
While at it also extract the clock control code into a separate routine
to avoid code duplication in dwmci_setup_bus().
No functional change.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Move FIFO threshold initialization into a separate function to make
dwmci_init() more readable.
No functional change.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Waiting for data busy is a logically separate operation and should be
implemented as a separate routine. Follow Linux kernel example and
extract it from dwmci_send_cmd(). This way it doesn't clutter
dwmci_send_cmd() function, and can be reused later in other cases.
No functional change.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
struct idmac is only used in dw_mmc.c, so move it there from dwmmc.h to
avoid cluttering the interface in the header.
No functional change.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Add a new defconfig file for the AM335x High Security EVM. This config
is specific for the case of SPI booting.
Signed-off-by: Andrew Davis <afd@ti.com>
CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/22014
- Convert tqma6q_mba6 to watchdog DM to fix reset.
- Convert tqma6q_mba6 to PMIC and I2C DM.
- Convert tqma6q_mba6 to OF_UPSTREAM.
- Do not print the board name twice on tqma6.
- Enable CMD_ERASEENV for imx8mm/mp Phytec boards.
- Add imx8ulp binman support.
- Fix imx8 build when CONFIG_IMX_BOOTAUX is set.
Currently, the devicetree model as well as the board variant name
are shown:
...
Model: TQ TQMa6S/DL on MBa6x
Board: TQMa6DL on a MBa6x
...
Unselect the CONFIG_DISPLAY_BOARDINFO option so that the
board name is printed only once in board_late_init() instead.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Currently, the power_init_board() function is not executed because
CONFIG_POWER_LEGACY is not selected.
Convert to PMIC driver model, which allows removing board I2C code in
favor of the I2C driver model.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Instead of using the local imx6-tqma6 devicetree copies from U-Boot,
convert the imx6-tqma6 target to OF_UPSTREAM so that the upstream
kernel devicetrees can be used instead.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Commit 68dcbdd594 ("ARM: imx: Add weak default reset_cpu()") caused
the 'reset' command in U-Boot to not cause a board reset.
Fix it by switching to the watchdog driver model via sysreset, which
is the preferred method for implementing the watchdog reset.
Signed-off-by: Fabio Estevam <festevam@denx.de>
- Re-use i.MX 93 Makefile target as similar boot process
- Create imx8ulp-u-boot.dtsi for binman image architecture
- Create both SPL and U-Boot containers configuration
Key differences between the 93 and 8ULP SPL container are:
- No LPDDR training library needed for 8ULP
- 8ULP requires a uPower binary (RISC-V core) for power management
- 8ULP also requires a M33 binary to work properly
Signed-off-by: Gary Bisson <bisson.gary@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
This is extending commit da96f93cda ("spl: binman: Disable u_boot_any
symbols for i.MX93 boards") to i.MX 8ULP boards.
Signed-off-by: Gary Bisson <bisson.gary@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
