meson generates the `mm-daemon-enums-types` source and header files.
These are used when building `ModemManager` executable and different
plugins. However, these enums are only stated as dependencies on the
`ModemManager` executable build.
This has been fixed by also adding the generated files targets as
dependencies in the required plugins.
The `broadmobi`, `dlink`, `telit` and `tplink` plugins include the
`mm-port-enums-types.h` header. However, they do not use any symbol
defined there.
The `huawei` plugin as includes the `mm-port-enums-types.h` header
but it does not include the build targets as dependencies.
These issues have been fixed by removing the unnecessary includes
from `broadmobi`, `dlink`, `telit` and `tplink` plugins and by
including the enums build target in the `huawei` target.
This type was a JSON description bug in libqmi, it should have never
been a struct by itself. This was changed in libqmi by the 1.31.3
snapshot, so let's use the new methods instead of the deprecated ones.
This allows us to not rely on bash which may not be available on
constrained systems, e.g. Yocto-built embedded systems. The scripts now
pass shellcheck.
Signed-off-by: Sven Schwermer <sven.schwermer@disruptive-technologies.com>
This silents a warning given by udev:
Configuration file /usr/lib/udev/rules.d/77-mm-fibocom-port-types.rules is marked executable. Please remove executable permission bits. Proceeding anyway.
The MBIM command PIN LIST returns only status of pin locks and omits
puk-locked facilities. This caused the pop-up window for unlocking
PUK is not shown after reboot.
Currenty active PUK lock has to be obtained using additional call
for PIN command but only single facility is supported this way.
We won't create a full new different modem object based on whether the
ID_MM_FIBOCOM_INITIAL_EPS_OFF_ON tag is found or not. Instead, we
always will create the same object type, and detect whether the OFF/ON
cycle is required during runtime.
Assume that the method to change the initial EPS bearer settings is
always implemented in the parent, so that we can avoid the runtime
check.
This also fixes the codepath that would happen if the
iface_modem_3gpp_parent->set_initial_eps_bearer_settings == NULL
condition was valid, as that would end up with a GTask never completed.
When the attach APN settings are changed, the device will go through a
radio on -> radio off -> radio on cycle so that the new changes are
taken into consideration.
This change is done in a Fibocom-specific MBIM modem implementation
because it's working around a firmware bug that would prevent for the
attach settings to be considered automatically.
If the modem is disabled:
* Polling is completely halted.
* Thresholds are disabled.
* The user is allowed to call Setup() or SetupThresholds() to change
the settings, even if the actual polling or thresholds setup isn't
in effect.
When the modem is enabled:
* Polling will be started if there is a existing polling rate.
* Thresholds will be setup based on the existing threshold settings.
Fixes https://gitlab.freedesktop.org/mobile-broadband/ModemManager/-/issues/504
So that when the meson build does the template replacement, the
generated file is also executable and can be used as Exec line in the
test DBus service file.
Fixes the 'test-stub' unit test in meson.
The test service file is used in the test-plugin-generic unit tests,
which require the ModemManager daemon to be launched in a private test
DBus session.
The 'export_packages' field in the generate_gir() command should
include the name of the pkg-config package being exported, not the
name of the library file.
Without this change, building GIR files depending on the one we
provide here would fail as the corresponding .pc file isn't found.
fwupd expects device IDs which are unique for each device and its
variants. However, Quectel re-uses the same USB VID & PID among
different variants such as EG25, EC25, EC20, etc. Moreover, each
variant may have subvariants such as EG25GGB, EG25GGC, EG25AFF,
EG25AFX, etc.
Add the name of the modem to the device IDs to build more unique device
IDs such as USB\VID_2C7C&PID_0125&REV_0001&NAME_EC25GGB.
Expose the generic device id method as a public API for plugins.
Plugins can call this method first and then add their own device ids on
top in case the generic ones aren't specific enough like in the case of
Quectel modems.
Do not build the mask of "all" modes based only on the supported radio
interfaces, also filter out those modes that would not be available
based on the current capabilities enabled.
In GSM/UMTS+CDMA/EVDO multimode devices, the 4G and 5G mode switching
operations are exclusively limited to the capability selection that
has LTE+5GNR exclusively.
We cannot allow switching to 4G-only, 5G-only or 4G+5G if the current
capabilities have GSM/UMTS or CDMA/EVDO.
Fixes https://gitlab.freedesktop.org/mobile-broadband/ModemManager/-/issues/503
We use capability switching logic exclusively for configuring GSM/UMTS+CDMA/EVDO devices
(regardless of whether it has LTE/5GNR or not) to add or remove the GSM/UMTS and CDMA/EVDO
capabilities.
Based on the same logic, we will allow 4 combinations for GSM/UMTS+CDMA/EVDO+LTE+5GNR device:
"GSM/UMTS+CDMA/EVDO+LTE+5GNR", "GSM/UMTS+LTE+5GNR", "CDMA/EVDO+LTE+5GNR" and "LTE+5GNR"
Similarly, we will allow 4 combinations for GSM/UMTS+CDMA/EVDO+LTE device:
"GSM/UMTS+CDMA/EVDO+LTE", "GSM/UMTS+LTE", "CDMA/EVDO+LTE" and "LTE"
And, we will allow 3 combinations for GSM/UMTS+CDMA/EVDO device:
"GSM/UMTS+CDMA/EVDO", "GSM/UMTS" and "CDMA/EVDO"
Also, supported combination modes should be based on current capabilities and not entirely
upon supported radio interfaces.
1) If current capability has "gsm-umts" or "cdma-evdo" or both, do not
support 4G only, 5G only, or 4G+5G combination modes
2) If current capability neither has "gsm-umts" nor "cdma-evdo", only support
combination modes involving 4G and 5G.
Keep LTE or 5GNR always in current capabilities if supported by device.
Since capability switching logic is exclusively used for configuring
GSM/UMTS+CDMA/EVDO devices, decide if to have GSM/UMTS or CDMA/EVDO or both
or none when loading current capabilities.
On MBIM modems the type of PIN cannot be specified in MBIM_CID_PIN query
command and the modem responds only remaining attempts for the currently
active lock.
If PIN1 is unlocked and user tries to disable (or enable) it, MM won't
get an update of remaining attempts in response to PIN Query. This value
is returned only after the Set command and MM need to store it in
all (pin/puk)_set_(enter/enable/change)_ready functions.
Previous solution was to call the mm_iface_modem_update_unlock_retries
directly from these functions but it caused the notification to be send
too early and invalid number was displayed to user sometimes.
Instead of this MM will store numbers of remaining attempts and send
them in a single notification from modem_load_unlock_retries.
