* panel-applet/NMWirelessApplet.c: Fix deadlock. Add a separator
before 'select custom ESSID'.
* panel-applet/menu-info.c: Start rewrite for better headers. Not
fully complete, but syncing in prep for merge.
* panel-applet/icons/*png: New images
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@178 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Changes from J5
* info-daemon/NetworkManagerInfo.conf: fixed own permissions
* info-daemon/NetworkManagerInfoDbus.c: added service name to
syslog output
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@176 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* panel-applet/menu-info.c (nm_menu_network_draw_indicator): Flip
the logic to make this right.
* panel-applet/NMWirelessApplet.c (sort_networks_function): sort
devices so that wired networks are always first.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@169 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* initscript/Debian/.cvsignore:
* initscript/Slackware/.cvsignore:
Added new cvsignores for Makefile, Makefile.in
* test/.cvsignore:
Added nmtestdevices
* src/NetworkManagerDevice.c:
* src/NetworkManager.c:
Updated the wireless/wired HAL device strings from net.ethernet to
net.80203 or net.80211 depending on wired or wireless respectively
Should probably update the configure.in to ask for the correct HAL
version now.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@168 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* examples/python/NetworkManager.py:
s/Quality/Strength/
* examples/python/systray/network_tray.py:
Lots of little changes and fixes. been rotting for a while so I
figured I'd finally sync them all with CVS
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@166 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* configure.in: Add graphics
* panel-applet/Makefile.am: Add graphics
* panel-applet/icons/*: Add graphics
* panel-applet/NMWirelessApplet.c: Use new menu times to display
the icons fully lined up.
* panel-applet/menu-info.c:
* panel-applet/menu-info.h: Add another menu type.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@163 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
- Created a more robust security policy for the DBus service
- everything is denied by default
- root can own and send to the service
- users logged in at the console can send to the service
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@159 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManagerDevice.c
- (nm_device_get_essid): use iw_get_basic_config() rather than
iw_get_ext (SIOCGIWESSID) since prism54 cards don't like
the latter
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@157 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* TODO: fix typo
* docs/NetworkManager DBUS API.txt
- Update for new signal strength changes
* panel-applet/NMWirelessApplet.c
- Make panel icon show strength of the current connection
- Cleanups and memleak fixes
* panel-applet/NMWirelessApplet.h
- Add data members for signal strength on devices and networks
* panel-applet/NMWirelessAppletDbus.c
- Free more DBusErrors
- Update for new signal strength changes
- Make devices and networks more like real objects, use ref/unref methods
- Actually unlock the mutex when updating the active device
* src/NetworkManagerAP.c
- Change AP functions and data members from "quality"->"strength"
* src/NetworkManagerDbus.c
- Kill "getMaxQuality" and "getQuality" methods
- Add "getStrength" methods for Networks and Devices
* src/NetworkManagerDevice.[ch]
- Add accessors for device strength
- Add functions to update strength for a device. Note that not all drivers
actually support signal strength for scanned access points (Atmel drivers
being one)
- Calculate signal strength for each AP during scan
* src/NetworkManagerWireless.[ch]
- Add function to return signal strength % from a device and a raw quality struct
* test/nmclienttest.c
- Update for new signal strength changes
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@156 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManager.c
- Fix race condition between initscripts and NM on card insertion
which could cause a card to keep an IP address and routes around
even when it was not the active device
* src/NetworkManagerDbus.c
- Fix compile errors, free more DBusErrors
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@154 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* docs/NetworkManager DBUS API.txt
- Add an explanation of NM's API
* src/NetworkManagerDbus.c
- Free some more DBusErrors if needed
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@150 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* panel-applet/NMWirelessApplet.c
panel-applet/NMWirelessAppletDbus.c
- Start using NetworkDevice/WirelessNetwork structures in more places
- Update for unified device/network forcing in NetworkManager
* src/NetworkManager.c
- some code consolidation
* src/NetworkManagerDbus.c
- (nm_dbus_nm_set_active_device): "setActiveDevice" now takes either one
or two arguments: the first is the NM ID of the device to switch to,
and the second (optional) argument is the ESSID of a wireless network
to use as well.
- Get rid of "setNetwork" method due to above change
* src/NetworkManagerDevice.c
- (nm_device_new): perform scan and update best AP on device creation
- nm_device_activation_cancel_if_needed()->nm_device_activation_should_cancel()
- nm_device_activation_signal_cancel()->nm_device_activation_cancel(), and
spin waiting for cancellation to finish before returning
* src/NetworkManagerPolicy.c
- Changes here clarify the situations in which a device switch occurs, and
make sure to keep using a forced device and network if the user gives
us one
- Remove old unused code
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@149 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* panel-applet/NMWirelessAppletDbus.c
- Pull fresh devices and networks from NM when wireless networks
change. Provides faster feedback of a forced wireless network
* src/NetworkManagerDbus.c
- Return error when "getMaxQuality" is called on a wired device
- Make best_ap freezing actually work again, and signal cancellation
of activation if there's already a device activation when the user
freezes the best_ap
* src/NetworkManagerDevice.c
- Don't clear out the best_ap for wireless devices when the link goes
down, that's done elsewhere
- Kill any dhcp daemons when cancelling device activation since they
may be stuck waiting for a DHCP address, and since we're cancelling
activation we don't care about that anymore
* src/NetworkManagerPolicy.c
- Make sure to unref the device we ref earlier (we refed it to make sure
it stuck around during device activation and such)
- If we were going to change the best device, but its activating currently
(and therefore the change didn't occur due to the check earlier)
we mark the state changed to we come back to it later when device
activation has canceled and its no longer activating
* src/backends/NetworkManagerRedHat.c
- SIGKILL dhcp daemons rather than SIGTERM-ing them
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@143 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* examples/python/systray/network_tray.py
(network_tray.sort_networks):
Added support for having wireless always scanning
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@141 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
NOTE: this commit changes the behavior of wireless devices in
NetworkManager. They are now up all the time, scanning all
the time. Only the active device has an IP address and routing
information set up however. Also, NetworkManager will no longer
opportunistically switch wireless networks when a better one
comes in range, it will remain associated with one wireless network
until that one drops out.
* panel-applet/NMWirelessApplet.c
panel-applet/NMWirelessAppletDbus.c
- List all wireless cards and their respective networks
* src/NMLoadModules
- Use full path to /sbin/ip
* src/NetworkManager.c
- Keep wireless devices up all the time so they can scan
* src/NetworkManagerDbus.c
- On a WirelessNetworkUpdate signal from NMI, don't update
the "best" AP
* src/NetworkManagerDevice.c
- (nm_device_set_link_active): clear out the best ap for
wireless devices when the link is set to FALSE
- Scan on all wireless cards, all the time
- (nm_device_activation_worker): split out the wireless card
link-waiting code to a separate function
- Keep wireless cards up even if device activation fails
- Don't update the "best" ap as much
* src/NetworkManagerPolicy.c
- Don't update the best ap when checking if its frozen,
let link checking clear out a frozen best ap for us
* src/NetworkManagerWireless.c
- Scan on all wireless cards, all the time
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@140 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* examples/python/NetworkManager.py:
added CONNECTED, CONNECTING, and DISCONNECTED states
added methods to return number of devices of a single type
* examples/python/systray/network_tray.py:
did some tweaks to get the menu looking near what it is supposed
to look like. Also did a Airo card hack to make it show the
correct AP quality
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@134 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* panel-applet/no-networkmanager.png
panel-applet/Makefile.am
panel-applet/NMWirelessApplet.c
- Add a "NetworkManager not running" icon and use it
- Use new consolidated GConf keys rather than Preferred/Trusted
* TODO: update
* info-daemon/NetworkManagerInfo.c
info-daemon/NetworkManagerInfoDbus.[ch]
info-daemon/NetworkManagerInfoPassphraseDialog.c
- There are now no longer two separate lists of wireless networks,
but one list where each network is "trusted" or not trusted
- Add a "getNetworkTrusted" dbus method
- "WirelessNetworkUpdate" signal now sent rather than
"PreferredNetworkUpdate/TrustedNetworkUpdate" signals
- Start freeing some dbus errors (not completed yet)
* info-daemon/passphrase.glade
- Remove the "don't show" hints for pager and taskbar
- Add a title since its going to be in the taskbar
* src/NetworkManager.[ch]
src/NetworkManagerAPList.[ch]
- There are now no longer two separate lists of wireless networks,
but one list where each network is "trusted" or not trusted
* src/NetworkManagerAP.[ch]
- Add get/set "trusted" accessors and data bit
* src/NetworkManagerDbus.[ch]
- Add function to get "trusted" status of a network from NetworkManagerInfo
- Trap new WirelessNetworkUpdate signal rather than old separate signals
* src/NetworkManagerDevice.[ch]
- Add per-device config data (ip4 addr, gateway, netmask) and accessors
- (nm_device_new): Get device config from backend when initializing devices
- (nm_device_activation_worker): Split out device configuration on
activation to deal with static/dynamic IP differences, and try encryption
fallbacks on a device if the encryption method for the best AP is not good
- (nm_device_update_best_ap): convert to new consolidated access point lists from
NetworkManagerInfo, and copy over latest NMI info to best_ap when setting it
* src/NetworkManagerWireless.c
- libgcrypt code wasn't converting the MD5 digest to an ascii string, fix it
* src/backends/NetworkManagerRedHat.c
src/backends/NetworkManagerSystem.h
- (nm_system_device_update_config_info): Add function to get device configuration
from system data in ifcfg-* files
* src/backends/NetworkManagerDebian.c
src/backends/NetworkManagerGentoo.c
src/backends/NetworkManagerSlackware.c
- Add stub functions for getting device configuration
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@131 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
