LDO2 is expansion connector supply on STM32MP13xx DHCOR DHSBC rev.200.
LDO5 is carrier board supply on STM32MP13xx DHCOR DHSBC rev.200. Keep
both regulators always enabled to make sure both the carrier board and
the expansion connector is always powered on and supplied with correct
voltage.
Describe ST33TPHF2XSPI TPM 2.0 chip reset lines.
This is a port of Linux kernel patch posted at:
https://patchwork.kernel.org/project/linux-arm-kernel/patch/20250302152605.54792-1-marex@denx.de/
This change shall be removed when the Linux kernel DT change lands
and Linux kernel DTs get synchronized with U-Boot DTs.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Gabriel Dalimonte <gabriel.dalimonte@gmail.com> says:
This series adds support for file renaming to EFI_FILE_PROTOCOL.SetInfo().
One of the use cases for renaming in EFI is to facilitate boot loader
boot counting.
No existing filesystems in U-Boot currently include file renaming,
resulting in support for renaming at the filesystem level and a
concrete implementation for the FAT filesystem.
Link: https://lore.kernel.org/r/20250217182648.31294-1-gabriel.dalimonte@gmail.com
Following the UEFI specification. The specification did not seem to
delineate if file_name was explicitly a file name only, or could
include paths to move the file to a different directory. The more
generous interpretation of supporting paths was selected.
Signed-off-by: Gabriel Dalimonte <gabriel.dalimonte@gmail.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
In order to support renaming via SetInfo(), path must allow for longer
values than what was originally present when file_handle was allocated.
Signed-off-by: Gabriel Dalimonte <gabriel.dalimonte@gmail.com>
POSIX filesystem functions that create or remove directory entries contain
text along the lines of "[function] shall mark for update the last data
modification and last file status change timestamps of the parent
directory of each file." [1][2][3] The common theme is these timestamp
updates occur when a directory entry is added or removed. The
create_link() and delete_dentry_link() functions have been changed to
update the modification timestamp on the directory where the direntry
change occurs. This differs slightly from Linux in the case of rename(),
where Linux will not update `new_path`'s parent directory's timestamp if
it is replacing an existing file. (via `vfat_add_entry` [4])
The timestamps are not updated if the build configuration does not support
RTCs. This is an effort to minimize introducing erratic timestamps where
they would go from [current date] -> 2000-01-01 (error timestamp in the
FAT driver). I would assume an unchanged timestamp would be more valuable
than a default timestamp in these cases.
[1] https://pubs.opengroup.org/onlinepubs/9799919799/functions/rename.html
[2] https://pubs.opengroup.org/onlinepubs/9799919799/functions/unlink.html
[3] https://pubs.opengroup.org/onlinepubs/9799919799/functions/open.html
[4] https://elixir.bootlin.com/linux/v6.12.6/source/fs/fat/namei_vfat.c#L682
Signed-off-by: Gabriel Dalimonte <gabriel.dalimonte@gmail.com>
The implementation roughly follows the POSIX specification for
rename() [1]. The ordering of operations attempting to minimize the chance
for data loss in unexpected circumstances.
The 'mv' command was implemented as a front end for the rename operation
as that is what most users are likely familiar with in terms of behavior.
The 'FAT_RENAME' Kconfig option was added to prevent code size increase on
size-oriented builds like SPL.
[1] https://pubs.opengroup.org/onlinepubs/9799919799/functions/rename.html
Signed-off-by: Gabriel Dalimonte <gabriel.dalimonte@gmail.com>
The create_link() code was previously duplicated in two existing functions.
The two functions will be used in a future commit to achieve renaming.
Signed-off-by: Gabriel Dalimonte <gabriel.dalimonte@gmail.com>
Add a helper to avoid needing to use a list within a list for this
simple case.
Update existing users of runpipe() to use this where possible.
Signed-off-by: Simon Glass <sjg@chromium.org>
This file has a lot of warnings. Before adding any more features, fix
those which are straightforward to resolve.
Signed-off-by: Simon Glass <sjg@chromium.org>
Throwing an Exception is not very friendly since it is the top-level
class of all exceptions. Declare a new class instead.
Signed-off-by: Simon Glass <sjg@chromium.org>
- Ensure `free_ctx` is called in both error and success paths.
- Fix memory leak in `ctx.signature` when `do_add` fails."
Triggers found by static analyzer Svace.
Signed-off-by: Anton Moryakov <ant.v.moryakov@gmail.com>
The current code has a problematic corner case with formar "%c" and
0 as parameter. The proper zero byte is being emitted into digit buffer
but the final copy into outstr expects null-terminated string and doesn't
copy the required \0 byte. This has lead to malformed TFTP packets, refer
to tftp_send() which relies on %c to generate multiple zero-terminated
strings in one buffer.
Introduce a variable to force the copy of one character in this case.
The new behaviour is consistent with non-tiny implementation.
Reported-by: Chintan Vankar <c-vankar@ti.com>
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Siddharth Vadapalli <s-vadapalli@ti.com> says:
This series enables configs for USB DFU boot, USB DFU flash and USB Mass
Storage command for J784S4. The device-tree changes required for enabling
these features will be posted as patches to Linux device-tree mailing lists
and will eventually make it to U-Boot via DT Sync.
Link: https://lore.kernel.org/r/20250218094950.2542006-1-s-vadapalli@ti.com
Enable support for USB DFU boot via USB0 instance of USB on J784S4 SoC
which is a Cadence USB Controller. Additionally, enable support for USB
DFU flash and USB Mass Storage (UMS) command. While at it, sync with
savedefconfig.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
The USB0 instance of USB on J784S4 SoC is a Cadence USB Controller and
supports USB DFU boot. Enable support for it.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Enable ESM configs. ESMs are a prerequisite to enable
watchdog reset functionality. The ESM aka error signalling module
is primarily responsible for sensing the watchdog reset event.
Signed-off-by: Keerthy <j-keerthy@ti.com>
Initialize MCU & MAIN Domain ESMs as a prerequisite to enable
watchdog reset functionality. The ESM aka error signalling module
is primarily responsible for sensing the watchdog reset event.
Signed-off-by: Keerthy <j-keerthy@ti.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Use preload_check_sign to authenticate the generated image when testing the
preload signature in testPreLoad().
Signed-off-by: Paul HENRYS <paul.henrys_ext@softathome.com>
pre-load related config options are enabled to have support of it in host
tools.
'CONFIG_FIT_SIGNATURE=y' is being automatically removed since it is
selected by CONFIG_IMAGE_PRE_LOAD_SIG.
Signed-off-by: Paul HENRYS <paul.henrys_ext@softathome.com>
preload_check_sign is added so that it can be used to authenticate images
signed with the pre-load signature supported by binman and U-Boot.
It could also be used to test the signature in binman tests signing
images with the pre-load.
Signed-off-by: Paul HENRYS <paul.henrys_ext@softathome.com>
Add an empty inline declaration when compiling tools for a host where
unmap_sysmem() is not defined.
Signed-off-by: Paul HENRYS <paul.henrys_ext@softathome.com>
rsa_verify_openssl() is used in lib/rsa/rsa-verify.c to authenticate data
when building host tools.
Signed-off-by: Paul HENRYS <paul.henrys_ext@softathome.com>
Baocheng Su <baocheng.su@siemens.com> says:
This introduces a sysinfo driver which also permits SMBIOS support.
The first 10 patches of v2 have already been applied. The remaining is
solely the sysinfo driver. To maintain consistency and ease of searching
through the history, the series title remains unchanged.
Link: https://lore.kernel.org/r/20250218023614.52574-1-baocheng.su@siemens.com
Drop the info structure parsing of the board in favor of our new sysinfo
driver to avoid code duplication.
Signed-off-by: Baocheng Su <baocheng.su@siemens.com>
Signed-off-by: Li Hua Qian <huaqian.li@siemens.com>
[Jan: rebasing, split-up, cleanup]
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
This brings a sysinfo driver and DT entry for the IOT2050 board series.
It translates the board information passed from SE-Boot to SPL into
values that can be retrieved via the sysinfo API. Will is already used
to fill the SMBIOS table when booting via EFI.
Signed-off-by: Baocheng Su <baocheng.su@siemens.com>
Signed-off-by: Li Hua Qian <huaqian.li@siemens.com>
[Jan: split-off as separate patch, cleanup]
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Add a new field SYSID_BOARD_RAM_SIZE_MB to sysinfo structure to store
the size of RAM in MB. dram_init can use this field to get the RAM size
via sysinfo driver.
Signed-off-by: Baocheng Su <baocheng.su@siemens.com>
This commit introduces a new API to the sysinfo module, allowing access
to data elements. This is particularly useful for handling data with
multiple instances, such as MAC addresses.
Signed-off-by: Baocheng Su <baocheng.su@siemens.com>
During dma memcpy, bcdma descriptor gets allocated for each
transaction and not freed after completion of that transaction.
So, avoid the memory allocation for every transaction.
Add one descriptor per dma device and allocate it once in
resource setup. This descriptor can now be used for all
dma memcpy transactions optimally.
Signed-off-by: Prasanth Babu Mantena <p-mantena@ti.com>
serial_out_dynamic() takes a u8* addr and uses it for 8-bit or 32-bit
accesses, depending on the value of plat->reg_width. This results in a
pointer type mismatch that the compiler may even turn into an error:
drivers/serial/ns16550.c: In function ‘serial_out_dynamic’:
drivers/serial/ns16550.c:115:42: error: passing argument 1 of ‘out_be32’ from incompatible pointer type [-Wincompatible-pointer-types]
115 | out_be32(addr, value);
| ^~~~
| |
| u8 * {aka unsigned char *}
This error was observed on PowerPC.
Signed-off-by: J. Neuschäfer <j.ne@posteo.net>
If there is an unallocated memory area before the last, filling parting
the size calculation for MTD_SIZE_REMAINING does not take this hole
into account.
Fix this by calculating the remaining size just based on total size
and partition offset.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Rename the variants of env_mmc_load() for redundant and non-redundant
environment to env_mmc_load_redundant() and env_mmc_load_singular()
respectively and convert the env_mmc_load() implementation to use of
if (IS_ENABLED(...)). As a result, drop __maybe_unused from
mmc_env_is_redundant_in_both_boot_hwparts().
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Introduce a new function mmc_env_is_redundant_in_both_boot_hwparts()
which replaces IS_ENABLED(ENV_MMC_HWPART_REDUND) and internally does
almost the same check as the macro which assigned ENV_MMC_HWPART_REDUND
did, and call it in place of IS_ENABLED(ENV_MMC_HWPART_REDUND).
The difference compared to IS_ENABLED(ENV_MMC_HWPART_REDUND) is
in the last conditional, which does not do plain macro compare
(CONFIG_ENV_OFFSET == CONFIG_ENV_OFFSET_REDUND), but instead does
mmc_offset(mmc, 0) == mmc_offset(mmc, 1). If OF_CONTROL is not
in use, this gets optimized back to original macro compare, but
if OF_CONTROL is in use, this also takes into account the DT
properties u-boot,mmc-env-offset and u-boot,mmc-env-offset-redundant.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/24876
- Convert imx6q-lxr and imxrt1050 to OF_UPSTREAM.
- Fix potential memory leak on ]imx/imx8/imx8m]image.
- Restrict DDR_SI_TEST to only Siemens Capricorn board.
- Fix CONFIG_BOOTCOUNT_ALTBOOTCMD on Data Modul and DH imx8m boards.
The imx6q-lxr devicetree has landed in kernel 6.13.
Switch to OF_UPSTREAM to make use of the upstream devicetree.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Move content of dh_imx6_defconfig into dh_imx6.config. Retain legacy
dh_imx6_defconfig as multi-config for all DH i.MX6 DHSOM based boards.
Introduce separate imx6_dhcom_drc02_defconfig, imx6_dhcom_pdk2_defconfig
and imx6_dhcom_picoitx_defconfig for each i.MX6 DHSOM based board, to
make build for those boards easier. No functional change.
Signed-off-by: Marek Vasut <marex@denx.de>
Deduplicate the config files again, move CONFIG_BOOTCOUNT_ALTBOOTCMD
into common imx8mp_dhsom.config .
Fixes: 940135eea5 ("Kconfig: Move CONFIG_BOOTCOUNT_ALTBOOTCMD to Kconfig")
Signed-off-by: Marek Vasut <marex@denx.de>
Deduplicate the config files again, move CONFIG_BOOTCOUNT_ALTBOOTCMD
into common imx8m_data_modul.config .
Fixes: 940135eea5 ("Kconfig: Move CONFIG_BOOTCOUNT_ALTBOOTCMD to Kconfig")
Signed-off-by: Marek Vasut <marex@denx.de>
The environment is missing quotes for string variable, add them.
Fixes: 940135eea5 ("Kconfig: Move CONFIG_BOOTCOUNT_ALTBOOTCMD to Kconfig")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Tom Rini <trini@konsulko.com>
Dynamic memory, referenced by 'line', is allocated at imx8mimage.c:187
by calling function 'getline' and lost at imx8mimage.c:210.
Signed-off-by: Maks Mishin <maks.mishinFZ@gmail.com>
Dynamic memory, referenced by 'line', is allocated at imx8image.c:270
by calling function 'getline' and lost at imx8image.c:294.
Signed-off-by: Maks Mishin <maks.mishinFZ@gmail.com>
Dynamic memory, referenced by 'line', is allocated at imximage.c:761
by calling function 'getline' and lost at imximage.c:793.
Signed-off-by: Maks Mishin <maks.mishinFZ@gmail.com>
The DDR_SI_TEST config option is only relevant to the i.MX8 Capricorn
board.
Make DDR_SI_TEST depend on DDR_SI_TEST so that it does not show up
on other targets.
Signed-off-by: Liya Huang <1425075683@qq.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
