The condition for receiving a bloblist from TPL is reversed. This was
only noticed are the other fixes landed. Fix it.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Matthias Brugger <mbrugger@suse.com>
The content of CONFIG_OF_SPL_REMOVE_PROPS is the same in both
STM32MP15xx DHCOM and DHCOR defconfigs, deduplicate the content
into stm32mp15_dhsom.config .
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
The access-controllers DT property is not useful in STM32MP15xx SPL,
remove it to reduce SPL control DT size. No functional change.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Commit 2a00d73d08 ("spl: mmc: Try to clean up raw-mode options")
broke booting from SD card on STM32MP15xx , reinstate raw mode SD
boot configuration options and select the correct raw mode partition
for STM32MP15xx to fix SD boot on STM32MP15xx DHSOM.
Fixes: 2a00d73d08 ("spl: mmc: Try to clean up raw-mode options")
Reported-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
The root oscillators reference used to be in rcc node since
3d15245502 ("ARM: dts: stm32mp1: explicit clock reference needed by RCC clock driver")
however this is not part of upstream stm32mp151.dtsi . The
RCC driver does need this reference, reinstate it locally.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
The root oscillators reference used to be in rcc node since
3d15245502 ("ARM: dts: stm32mp1: explicit clock reference needed by RCC clock driver")
however this is not part of upstream stm32mp151.dtsi . The
RCC driver does need this reference, reinstate it globally.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Tested-by: Patrice Chotard <patrice.chotard@foss.st.com>
Since commit 6534d26ee9 ("lmb: do away with arch_lmb_reserve()"),
STM32F746-disco hangs when loading device tree just before starting
kernel:
Retrieving file: /stm32f746-disco.dtb
Kernel image @ 0xc0008000 [ 0x000000 - 0x19ae00 ]
Flattened Device Tree blob at c0408000
Booting using the fdt blob at 0xc0408000
Working FDT set to c0408000
Loading Device Tree to c05f8000, end c05ff71c ...
Adjust STACK_SIZE to 16KB for STM32 MCUs (F4/F7 and H7) boards
to fix kernel boot process as some of these boards embeds a limited
amount of memory.
Fixes: 6534d26ee9 ("lmb: do away with arch_lmb_reserve()")
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
The FIT name in RISC-V Falcon mode should be different from that in
normal boot mode; it is called linux.itb. If the setting is missing
in common/spl, the normal boot file name will be used.
Signed-off-by: Randolph <randolph@andestech.com>
Enable driver for DesignWare MSHC. TH1520 supports all
speed modes up to HS400ES and UHS SDR105.
Also enable ADMA and mmc command.
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Maksim Kiselev <bigunclemax@gmail.com>
Add SDHCI and EMMC controlles nodes on TH-1520 SoC. And enable them for
Lichee module 4A.
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Maksim Kiselev <bigunclemax@gmail.com>
There are difference between upstream DT and the old DT
in terms of reg base, reset gpio and syscon. Make the driver
compatible with upstream DT.
Tested-by: Anand Moon <linux.amoon@gmail.com>
Tested-by: E Shattow <lucent@gmail.com>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
Enable OF_UPSTREAM to use upstream DT and add starfive/ prefix to
the DEFAULT_DEVICE_TREE. Rename jh7110-starfive-visionfive-2-u-boot.dtsi
to jh7110-starfive-visionfive-2-v1.3b-u-boot.dtsi and set the v1.3b
device tree as the default device tree.
Drop redundant DT files from arch/riscv/dts/ and redundant clock and
reset definitions from include/dt-bindings/.
Since the old clock definitions is a little different from those in
upstream Linux, update the clock definitions in clock drivers
accordingly.
Tested-by: Anand Moon <linux.amoon@gmail.com>
Tested-by: E Shattow <lucent@gmail.com>
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
Import a slightly modified version of the LicheeRV Nano and SG2002
device trees from the Linux Kernel. The current supported IPs are UART,
MMC, Timer, PLIC and CLINT.
Signed-off-by: Thomas Bonnefille <thomas.bonnefille@bootlin.com>
Provide a page describing the usage of U-Boot on the LicheeRV Nano and a
description of the board.
Signed-off-by: Thomas Bonnefille <thomas.bonnefille@bootlin.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
This is a debug command to monitor the retention state of the data on
the array. The command needs a duplication of the mtd_read_oob()
function to actually return the maximum number of bitflips encountered
while reading the page. We could write a specific implementation for the
Sunxi driver but this is probably enough.
nand watch <off> <size> - check an area for bitflips
nand watch.part <part> - check a partition for bitflips
nand watch.chip - check the whole device for bitflips
The output may be a bit verbose and could look like:
=> nand watch.chip
device 0 whole chip
size adjusted to 0xff60000 (5 bad blocks)
NAND watch for bitflips in area 0x0-0xff60000:
Page 0 (0x00000000) -> error -74
Page 1 (0x00000800) -> error -74
Page 2 (0x00001000) -> error -74
Page 3 (0x00001800) -> error -74
Page 4 (0x00002000) -> error -74
Page 5 (0x00002800) -> error -74
Page 6 (0x00003000) -> error -74
Page 7 (0x00003800) -> error -74
Page 8 (0x00004000) -> error -74
Page 9 (0x00004800) -> error -74
Page 10 (0x00005000) -> error -74
Page 11 (0x00005800) -> error -74
Page 12 (0x00006000) -> error -74
Page 13 (0x00006800) -> error -74
Page 14 (0x00007000) -> error -74
Page 15 (0x00007800) -> error -74
Page 16 (0x00008000) -> error -74
Page 17 (0x00008800) -> error -74
Page 18 (0x00009000) -> error -74
Page 19 (0x00009800) -> error -74
Page 20 (0x0000a000) -> error -74
Page 21 (0x0000a800) -> error -74
Page 22 (0x0000b000) -> error -74
Page 23 (0x0000b800) -> error -74
Page 1110 (0x0022b000) -> up to 1 bf/chunk
Page 1122 (0x00231000) -> up to 1 bf/chunk
Page 1132 (0x00236000) -> up to 1 bf/chunk
Page 1362 (0x002a9000) -> up to 1 bf/chunk
Page 4990 (0x009bf000) -> up to 1 bf/chunk
Page 5728 (0x00b30000) -> up to 1 bf/chunk
Page 7116 (0x00de6000) -> up to 1 bf/chunk
Page 7160 (0x00dfc000) -> up to 1 bf/chunk
Page 7494 (0x00ea3000) -> up to 1 bf/chunk
Page 10842 (0x0152d000) -> up to 1 bf/chunk
Page 11614 (0x016af000) -> up to 1 bf/chunk
Page 11970 (0x01761000) -> up to 1 bf/chunk
Page 12536 (0x0187c000) -> up to 1 bf/chunk
Page 12687 (0x018c7800) -> up to 1 bf/chunk
Page 14298 (0x01bed000) -> up to 1 bf/chunk
Page 18268 (0x023ae000) -> up to 1 bf/chunk
Page 18760 (0x024a4000) -> up to 1 bf/chunk
Page 21440 (0x029e0000) -> up to 1 bf/chunk
Page 22336 (0x02ba0000) -> up to 1 bf/chunk
Page 22592 (0x02c20000) -> up to 1 bf/chunk
Page 23872 (0x02ea0000) -> up to 1 bf/chunk
Page 27584 (0x035e0000) -> up to 1 bf/chunk
Page 35008 (0x04460000) -> up to 1 bf/chunk
Page 37184 (0x048a0000) -> up to 1 bf/chunk
Page 41728 (0x05180000) -> up to 1 bf/chunk
Page 42176 (0x05260000) -> up to 1 bf/chunk
Page 43200 (0x05460000) -> up to 1 bf/chunk
Page 43328 (0x054a0000) -> up to 1 bf/chunk
Page 45376 (0x058a0000) -> up to 1 bf/chunk
Page 47040 (0x05be0000) -> up to 1 bf/chunk
Page 47552 (0x05ce0000) -> up to 1 bf/chunk
Page 49344 (0x06060000) -> up to 1 bf/chunk
Page 49856 (0x06160000) -> up to 1 bf/chunk
Page 62784 (0x07aa0000) -> up to 1 bf/chunk
Page 65153 (0x07f40800) -> up to 1 bf/chunk
Page 65228 (0x07f66000) -> up to 1 bf/chunk
Page 65382 (0x07fb3000) -> up to 1 bf/chunk
Page 98624 (0x0c0a0000) -> up to 1 bf/chunk
Page 101952 (0x0c720000) -> up to 1 bf/chunk
Page 107584 (0x0d220000) -> up to 1 bf/chunk
Page 118208 (0x0e6e0000) -> up to 1 bf/chunk
Page 126656 (0x0f760000) -> up to 1 bf/chunk
Page 127680 (0x0f960000) -> up to 1 bf/chunk
Page 129920 (0x0fdc0000) -> up to 1 bf/chunk
Maximum number of bitflips: 1
Pages with bitflips: 44/130752
It is also possible to reduce the output with the .quiet suffix in order
to just show the summary.
=> nand watch.chip
device 0 whole chip
size adjusted to 0xff60000 (5 bad blocks)
NAND watch for bitflips in area 0x0-0xff60000:
Maximum number of bitflips: 1
Pages with bitflips: 44/130752
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
The condition 'ret' is always true as it is never set to other than
-EIO.
Remove 'ret' and the condition for copy.
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Reviewed-by: Michael Trimarchi <micheal@amarulasolutions.com>
Previously, all LMB marked with LMB_NOMAP (above and below ram_top)
are considered as invalid entry in TLB.
Since commit 1a48b0be93 ("lmb: prohibit allocations above ram_top
even from same bank") all LMB located above ram_top are now marked
LMB_NOOVERWRITE and no more LMB_MAP.
This area above ram_top is reserved for OPTEE and must not be cacheable,
otherwise this leads to a Panic on some boards (Issue on STM32MP135F-DK).
Restore previous behavior by marking invalid entry all TLB above ram_top.
Fixes: 1a48b0be93 ("lmb: prohibit allocations above ram_top even from same bank")
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
cc: Sughosh Ganu <sughosh.ganu@linaro.org>
Acked-by: Sughosh Ganu <sughosh.ganu@linaro.org>
I have an original rpi installed now, loaded with OS Lite (32-bit)
Add an entry for it so that it can be used for testing.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
This patch was written before the XPL change-over. Update the Makefile
condition to the new way.
Signed-off-by: Simon Glass <sjg@chromium.org>
Fixes: ae3b5928d6 ("x86: coreboot: Allow building an expo for...")
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
The logic in get_details() retrieves the default source directory from
the Labgrid settings. This is convenient for interactive use, since it
allows pytests to be run from any directory and still find the source
tree.
However, it is not actually correct.
Gitlab sets the current directory to the source tree and expects that to
be used. At present it is ignored. The result is that Gitlab builds
whatever happens to be in the default source directory, ignoring the
tree it is supposed to be building.
Fix this by using the directory of the source tree, always. This is
obtained by looking at the grandparent of the conftest.py file.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reported-by: Tom Rini <trini@konsulko.com>
Fixes: bf89a8f1fc ("test: Introduce the concept of a role")
Tested-by: Tom Rini <trini@konsulko.com>
In case DM drivers probe earlier than board clock setup is done
init of basic clocks should be done in CAR driver probe as well.
Add it to avoid possible clock related problems.
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Return PLL id into struct clk if PLL is parsed from device
tree instead of throwing an error. Allow requesting PLL
clock rate via get_rate op.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
