Add Retronix R-Car V4H Sparrow Hawk board based on Renesas R-Car V4H ES3.0
(R8A779G3) SoC. This is a single-board computer with single gigabit ethernet,
DSI-to-eDP bridge, DSI and two CSI2 interfaces, audio codec, two CANFD ports,
micro SD card slot, USB PD supply, USB 3.0 ports, M.2 Key-M slot for NVMe SSD,
debug UART and JTAG.
DT is imported from Linux next commit:
a719915e76f2 ("arm64: dts: renesas: r8a779g3: Add Retronix R-Car V4H Sparrow Hawk board support")
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Introduce weak renesas_dram_init_banksize() function which is meant
to be used to adjust DRAM bank sizes after the common Renesas board
DRAM bank handling code finished. This is mainly meant for boards
which ship with multiple DRAM size options, which can be detected
at runtime. This allows such boards to ship with single U-Boot
binary on all boards.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
There are common MMC args for TI plats in include/environment/ti/mmc.env.
Since we already include this, there is no need to redefine these
MMC vars. Use the defaults.
This seems like something that could have been done while refactoring
these vars in the first place as it happened after this AM62A file
was available hence the fixes tag.
Reported-by: Chirag Shilwant <c-shilwant@ti.com>
Fixes: 3709b52915 ("env: ti: mmc.env: Move mmc related args to common place")
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
Acked-by: Chirag Shilwant <c-shilwant@ti.com>
Reviewed-by: Judith Mendez <jm@ti.com>
Commit 359e1d4a57 ("board: dragonboard410c: Use button_cmd instead of
custom code") was made in parallel with commit 8f5685d5d3 ("button:
qcom-pmic: prettify and standardise button labels"), which changed the
default button label from "vol_down" to "Volume Down". This is causing
errors in the console during boot now:
No button labelled 'vol_down'
Fix this by using the new label.
Fixes: 359e1d4a57 ("board: dragonboard410c: Use button_cmd instead of custom code")
Fixes: 8f5685d5d3 ("button: qcom-pmic: prettify and standardise button labels")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by:
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250417-db410c-fixes2-v1-1-76ad994da152@linaro.org
Signed-off-by: Casey Connolly <casey.connolly@linaro.org>
The EFI-loader code has not been fully converted to use bloblist, so
relies on the SMBIOS-table address being set in global_data.
Set this up in write_tables() so that the SMBIOS tables are actually
available.
Enable the command for x86 QEMU so that the SMBIOS tests actually run.
Signed-off-by: Simon Glass <sjg@chromium.org>
Fixes: 83ce35d6ebb ("emulation: Use bloblist to hold tables")
Reported-by: Niklas Sombert <niklas.sombert@uni-duesseldorf.de>
Tested-by: Niklas Sombert <niklas.sombert@uni-duesseldorf.de>
Tested-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Add bloblist support to total_comput platform for passing data
from TF-A using the firmware handoff framework.
Signed-off-by: Jayanth Dodderi Chidanand <jayanthdodderi.chidanand@arm.com>
A small delay between DRAM read access with wrong parameters and
reconfiguration is necessary.
Without a delay between DRAM read access and a following reconfiguration
this reconfiguration fails for certain DRAM chips (Nanya).
Signed-off-by: Michael Bode <michael.bode@bshg.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
When using SPL on i.mx6 we frequently notice some DDR initialization
mismatches between the SPL code and the non-SPL code.
As the non-SPL code have been tested for long time and proves to be
reliable, let's configure the DDR in the exact same way as the non-SPL
case.
The idea is simple: just use the DCD table and write directly to the DDR
registers.
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Migrate to OF_UPSTREAM for phyCORE-i.MX93 since board can use upstream
Linux kernel device-tree for phyBOARD-Segin-i.MX93.
Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Reviewed-by: Wadim Egorov <w.egorov@phytec.de>
Adjust Kconfig and defconfig and add SPL initialization code for
Lichee Pi 4A. Then enable SPL support which we've added for TH1520 SoC
earlier. The board devicetree is changed to use TH1520 binman
configuration to generate bootable images.
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
The write_host_id is the last element here and order does matter. This
may have gone unnoticed before as by default all elements are 0, but
if this is updated to a different host, it will not work. Update
the order so write_host_id is the last element in all current secure
board configs.
Reported-by: Prashant Shivhare <p-shivhare@ti.com>
Signed-off-by: Andrew Davis <afd@ti.com>
Add CMD_CACHE to list of configs implied by TI_COMMON_CMD_OPTIONS.
This allows the usage of cache commands from U-Boot prompt.
Signed-off-by: Anshul Dalal <anshuld@ti.com>
Reviewed-by: Daniel Schultz <d.schultz@phytec.de>
I haven't been involved in U-Boot development for quite a while, so
CCing me on patches isn't currently useful. Add a .mailmap entry that I
believe will turn off patch CCs. This can always be removed if I become
active again! Remove myself from a few MAINTAINERS failed and the git
mailrc file too.
Since most boards now use the same generic device config header, move its
setup to SoC Kconfig instead of setting SYS_CONFIG_NAME in each board's
Kconfig.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
The LG Optimus 2X is a touchscreen-based, slate-sized smartphone designed
and manufactured by LG that runs the Android operating system. The
Optimus 2X features a 4" WVGA display, an Nvidia Tegra 2 dual-core chip,
512 MB of RAM and extendable 8 GB of internal storage. UART-B is default
debug port.
Tested-by: Ion Agorria <ion@agorria.com>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
The LCKFB TaishanPi is a single-board computer based on the RK3566 SoC.
Specification:
- 1/2 Gib RAM
- Optinal EMMC
- SD-Card
- HDMI / MIPI CSI / MIPI DSI
- USB 2.0 Host (Type-A)
- USB 2.0 Host / OTG (Type-C)
- No Ethernet
This patch adds U-Boot support for the LCKFB TaishanPi RK3566 board, including:
- U-Boot device tree
- Default defconfig
- Board documentation
- MAINTAINERS entry
Changes in v2:
- Removed unused configs from `lckfb-tspi-rk3566_defconfig`
- Reordered TaishanPi entry in `doc/board/rockchip/rockchip.rst` alphabetically
Link to v1:
https://lore.kernel.org/u-boot/tencent_95ED0C0545D87B6A8C4B62EC045D53AD2406@qq.com/
Signed-off-by: Jiehui He <jiehui.he@foxmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
The 5 Max is another board in the Orange Pi 5 family.
It's overall similar to the 5 Plus, but in a smaller form factor,
which leads to some I/O being reshuffled, but nothing relevant
to u-boot.
So, just reuse the config for the 5 Plus and adjust the DT names.
Reviewed-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Ilya Katsnelson <me@0upti.me>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Add fit_addr_r to the environment to allow us to boot from a FIT image.
Increase the maximum Image size from 23 MB to 26 MB by moving the
initramfs start address up. This gives us a bigger ranger to
provide kernel images which are not stripped down too much.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Reviewed-by: Tom Rini <trini@konsulko.com>
The set_dfu_alt_info() function calls the ALLOC_CACHE_ALIGN_BUFFER()
macro to declare a `buf' variable pointer into an array allocated on the
stack. It then calls the memset() function to clear the useable portion
of the array using the idiomatic expression `sizeof(buf)'.
While this would indeed work fine for an array, in the present case we
end up clearing only the size of a pointer.
Fix this by specifying the explicit size `DFU_ALT_BUF_LEN' instead.
Fixes: ec2933e543 ("board: stm32mp1: move set_dfu_alt_info in st common directory")
Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Tom Rini <trini@konsulko.com>
Cc: Marek Vasut <marex@denx.de>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
This patch adds i.MX95 19x19 EVK board basic support.
Messaging unit for EdgeLock Secure Enclave, messaging unit for System
Manager, uSDHC for SD Card, gpio, lpuart are supported now.
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Alice Guo <alice.guo@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
SeeedStudio BeagleBone Green Eco (BBGE) is a clone of the BeagleBone Green
(BBG). It has minor differences from the BBG, such as a different PMIC,
a different Ethernet PHY, and a larger eMMC.
The PMIC is not yet supported in mainline, but the work is ongoing.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Initialize the ESM & PMIC ESM. This allows things like
the watchdog to reset the board when tripped.
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Just enable dfu options, We have MMC and RAM as options here.
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Reviewed-by: Bryan Brattlof <bb@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Most of the users of BeagleY-AI are headless OR do not use serial port.
In such cases, it is very useful for the device to provide some level of
indication to know what state their board is at.
Unfortunately, with a single LED (ignoring the :heartbeat), the
options are limited. This is a precursor patch to actually enabling
the LED options that will use the same in the follow on patches.
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Bryan Brattlof <bb@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
We just have a single MMC on BeagleY-AI. So drop all other boot options,
In the meanwhile, we also will use efiboot and standard boot methods
consistent with other K3 Beagle products.
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Reviewed-by: Bryan Brattlof <bb@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
just use beagley_ai as pattern match for the files and folders involved.
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Reviewed-by: Bryan Brattlof <bb@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
enable text based default U-Boot Environment by enabling
CONFIG_ENV_SOURCE_FILE
and adding default environment file:
board/siemens/capricorn/capricorn_cxg3.env
Signed-off-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Walter Schweizer <walter.schweizer@siemens.com>
Siemens have some defconfigs for different hardware versions,
all based on mainline cxg3 board. For easier updating the
downstream defconfigs, move common settings into new file.
configs/imx8qxp_capricorn.config
Signed-off-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Walter Schweizer <walter.schweizer@siemens.com>
Fixup previous merge resolution of this series. Intent is to ease code
readability and logic to match ordering in CONFIG_OF_LIST
- Remove "starfive/" string math
- Remove redundant local cache of calls to get_*_from_eeprom()
- Match name before EEPROM product_id in board_fit_config_name_match()
- Remove single-consumer FDTFILE_* defines
- Do not set fdtfile for visionfive-2-* when unknown model revision
Fixes: 5a0a93a768 ("Merge branch 'master' of https://source.denx.de/u-boot/custodians/u-boot-riscv")
Signed-off-by: E Shattow <e@freeshell.de>
We support all JH7110 boards with starfive_visionfive2_defconfig.
The relevant device-tree is selected at runtime based on EEPROM data.
Support setting $fdtfile to the file name of the DeepComputing Framework
motherboard (FML13V01) device-tree.
Reviewed-by: Hal Feng <hal.feng@starfivetech.com>
Reviewed-by: Matthias Brugger <mbrugger@suse.com>
Reviewed-by: E Shattow <e@freeshell.de>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
For nor0 boot for the STMicroelectronics boards, the bootfs
is found in SD-Card = mmc0 for nor0 boot.
Introduce a new file configuration file stm32mp25_st_common.h
to manage this specific behavior for the STMicroelectronics
boards; change the boot order for nor0 boot and don't use
the default DISTRO order define in BOOT_TARGET_DEVICES:
mmc1, ubifs, mmc0, mmc2.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Signed-off-by: Patrice CHOTARD <patrice.chotard@foss.st.com>
