There are backslashes in some of the tags which seems to be unnecessary.
Remove then.
Change the word 'either' to 'any' since there are three options.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
The details of the sysfw.itb from the R5 build that
also needs to be copied as part of the target images
is missing, but is included in the image formats a
little further down, so add it to the instructions.
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Acked-by: Nishanth Menon <nm@ti.com>
%s/data that change/data that changes/
%s/cannot be used has/cannot be used for/
%s/Otherwise/Otherwise,/
%s/allows better measurement/allows for better measurement/
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
board_init_f for the am62a is missing the call to spl_enable_cache which
exists for all other am62 platforms (check am625_init.c &
am62p5_init.c).
This allows the usage of caches while loading and parsing the u-boot.img
FIT resulting in ~2x speedup in the A53 SPL stage.
Signed-off-by: Anshul Dalal <anshuld@ti.com>
There are common MMC args for TI plats in include/environment/ti/mmc.env.
Since we already include this, there is no need to redefine these
MMC vars. Use the defaults.
This seems like something that could have been done while refactoring
these vars in the first place as it happened after this AM62A file
was available hence the fixes tag.
Reported-by: Chirag Shilwant <c-shilwant@ti.com>
Fixes: 3709b52915 ("env: ti: mmc.env: Move mmc related args to common place")
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
Acked-by: Chirag Shilwant <c-shilwant@ti.com>
Reviewed-by: Judith Mendez <jm@ti.com>
This clears UHS_MODE_SELECT for timing modes <= MMC_HS_52.
When initializing to HS400 mode, the host controller downgrades to non-uhs
modes so clear UHS_MODE_SELECT at modes <= MMC_HS_52.
This fixes eMMC writes on j7200 EVM.
Fixes: 6067aa66b3 ("mmc: am654_sdhci: Add am654_sdhci_set_control_reg")
Signed-off-by: Judith Mendez <jm@ti.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
The condition here is reversed, which makes link and coral very slow,
leading to lab failures.
Fixes 6c171f7a18 ("common: board: make initcalls static")
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org>
More Qualcomm fixes for 2025.07
* Adjust fdtfile logic to support more boards
* Support linux,code variable in qcom-pmic button driver
* Minor CLK API adjustments and apq8096/msm8916 fixes
* vbus regulator register fixes
* dragonboard410c KASLR support and other fixes
Change the vcpumntirq in the GICv3 node from SPI to PPI.
Prevents Linux from complaining:
'[Firmware Bug]: CPU interface incapable of MMIO access'
Fixes: 6d722894fd "board: emulation: Add QEMU sbsa support"
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Most device vendors put "Volume Down" button onto PMIC RESIN.
But Sony is special: see
dts/upstream/src/arm64/qcom/sdm630-sony-xperia-nile.dtsi or [1].
They put "Volume Down" on PMIC GPIO 7 where others usually put
"Volume Up", and KEY_VOLUMEUP is inside &pon_resin.
Currently if you boot U-Boot on such Sony device, you end up
with 2 "Volume Down" buttons, and no "Volume Up", which makes
navigating menu problematic.
Support reading devicetree "linux,code" property and override
statically defined button code & label based on that.
[1] https://elixir.bootlin.com/linux/v6.15-rc3/source/arch/
arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi#L263
Signed-off-by: Alexey Minnekhanov <alexeymin@postmarketos.org>
Signed-off-by: Alexey Minnekhanov <alexeymin@minlexx.ru>
Reviewed-by: Casey Connolly <casey.connolly@linaro.org>
Link: https://lore.kernel.org/r/20250424014811.3809818-1-alexeymin@minlexx.ru
Signed-off-by: Casey Connolly <casey.connolly@linaro.org>
As of commit dc8754e8e4 ("clk/qcom: apq8016: improve clk_enable logging")
there are now warnings in the U-Boot console on DragonBoard 410c:
apq8016_clk_enable: unknown clk id 122
apq8016_clk_enable: unknown clk id 123
apq8016_clk_enable: unknown clk id 124
apq8016_clk_enable: unknown clk id 125
This is because we don't implement enable() properly for the SDCC clocks.
Currently they are being enabled as part of set_rate().
Fix this by moving the enable calls out of the apq8016_clk_init_sdc()
function and convert them to the equivalent GATE_CLK_POLLED() definitions.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Reviewed-by: Casey Connolly <casey.connolly@linaro.org>
Link: https://lore.kernel.org/r/20250424-apq8016-clock-fixes2-v2-6-fcc371c9e45f@linaro.org
Signed-off-by: Casey Connolly <casey.connolly@linaro.org>
GATE_CLK() in its current state is unsafe: A simple write to the clock
enable register does not guarantee that the clock is immediately running.
Without polling the clock status, we may issue writes to registers before
the necessary clocks start running. This doesn't seem to cause issues in
U-Boot at the moment, but for example removing the CLK_OFF polling in TF-A
for the SMMU clocks on DB410c reliably triggers an exception during boot.
Make it possible to poll the branch clock status register, by adding a new
GATE_CLK_POLLED() macro that takes the extra register address. Existing
usages work just as before, without polling the clock status. Ideally all
usages should be updated to specify the correct poll address in the future.
The Qualcomm naming for these clocks is "branch" and not "gate", but let's
keep the existing naming for now to avoid confusion until all others
drivers have been converted.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Reviewed-by: Casey Connolly <casey.connolly@linaro.org>
Link: https://lore.kernel.org/r/20250424-apq8016-clock-fixes2-v2-4-fcc371c9e45f@linaro.org
Signed-off-by: Casey Connolly <casey.connolly@linaro.org>
The SDCC_...(n) macros in clock-apq8016.c result in the wrong addresses:
- SDCC1: SDCC_APPS_CBCR(0) = ((0 * 0x1000) + 0x41018) = 0x41018
Should be 0x42018, this is an invalid register close to the USB clocks.
- SDCC2: SDCC_APPS_CBCR(1) = ((1 * 0x1000) + 0x41018) = 0x42018
Should be 0x43018, this is the SDCC1 clock.
When we try to enable SDCC2, we actually end up enabling SDCC1. When we try
to enable SDCC1, we just issue some broken register writes.
This hasn't caused any trouble so far, because the boot firmware is keeping
both SDCC clocks running. However, if these clocks are disabled when
entering U-Boot, MMC initialization is failing.
Fix this by using the proper offset for the macros. The SDCC_CMD_RCGR() was
already correct, but change it the same way for consistency.
Fixes: 085921368b ("arm: Add support for Qualcomm Snapdragon family")
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Reviewed-by: Casey Connolly <casey.connolly@linaro.org>
Link: https://lore.kernel.org/r/20250424-apq8016-clock-fixes2-v2-1-fcc371c9e45f@linaro.org
Signed-off-by: Casey Connolly <casey.connolly@linaro.org>
At the moment, the dragonboard410c_defconfig specifies a custom
SYS_MALLOC_LEN, lower than the default for Qualcomm boards defined in
arch/arm/mach-snapdragon/Kconfig. It looks like it's too low, since
flashing larger sparse partition images using Fastboot fails with:
FAILED (remote: 'Malloc failed for: CHUNK_TYPE_RAW')
We are not really that memory-constrained for U-Boot on DB410c, so fix
this by just dropping the custom malloc size and using the default.
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by:
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250417-db410c-fixes2-v1-2-76ad994da152@linaro.org
Signed-off-by: Casey Connolly <casey.connolly@linaro.org>
Commit 359e1d4a57 ("board: dragonboard410c: Use button_cmd instead of
custom code") was made in parallel with commit 8f5685d5d3 ("button:
qcom-pmic: prettify and standardise button labels"), which changed the
default button label from "vol_down" to "Volume Down". This is causing
errors in the console during boot now:
No button labelled 'vol_down'
Fix this by using the new label.
Fixes: 359e1d4a57 ("board: dragonboard410c: Use button_cmd instead of custom code")
Fixes: 8f5685d5d3 ("button: qcom-pmic: prettify and standardise button labels")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by:
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250417-db410c-fixes2-v1-1-76ad994da152@linaro.org
Signed-off-by: Casey Connolly <casey.connolly@linaro.org>
i2c bugfixes for v2025.07-rc4
- designware_i2c: fix globally wrong return value -1 into -ETIMEDOUT
in driver, which leaded in silent errors as a timeout resulted in
an uninitialized value being returned, potentially causing
unexpected behavior.
Change the return value for timeout errors in i2c-designware from 1 to
-ETIMEDOUT. Returning errors as negative values is standard practice in the
u-boot, which enhances error handling consistency across the codebase.
The current behavior can lead to silent errors when functions check for
negative return values to identify errors. For example, in
`dm_i2c_reg_read` from i2c-uclass.c, a timeout results in an uninitialized
value being returned, potentially causing unexpected behavior.
Cc: Heiko Schocher <hs@denx.de>
Cc: Tom Rini <trini@konsulko.com>
Cc: Wojciech Szamocki <wojciech.szamocki@nokia.com>
Signed-off-by: Wojciech Szamocki <wojciech.szamocki@nokia.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
The bitshift in GEM_CLK_CTRL register is five bits, not two. There are
four bits for each GEM, and one bit reserved in between.
This has caused that using more than one GEM is impossible,
additionally corrupting the GEM0's configuration, leaving GEM0
unusable as well (ie. if GEM0 and GEM1 are used, GEM1 configuration is
going to write to GEM0's registers wrong value, leaving GEM0 unusable)
Signed-off-by: Frantisek Bohacek <rutherther@ditigal.xyz>
Link: https://lore.kernel.org/r/20250522060703.4863-1-rutherther@ditigal.xyz
Signed-off-by: Michal Simek <michal.simek@amd.com>
Commit 21e7fa0e3a ("image: android: handle ramdisk default address")
changed the default behavior for header versions less than or equal to 2.
The ramdisk address (img_data.ramdisk_ptr) is only assigned to *rd_data
if the physical load address (img_data.ramdisk_addr) is equal to 0 or
the Android default ramdisk address.
/* Ramdisk can be used in-place, use current ptr */
if (img_data.ramdisk_addr == 0 ||
img_data.ramdisk_addr == ANDROID_IMAGE_DEFAULT_RAMDISK_ADDR) {
*rd_data = img_data.ramdisk_ptr;
} else {
ramdisk_ptr = img_data.ramdisk_addr;
*rd_data = ramdisk_ptr;
memcpy((void *)(ramdisk_ptr), (void *)img_data.ramdisk_ptr,
img_data.ramdisk_size);
}
When the img_data.ramdisk_addr and the img_data.kernel_addr are the same
*rd_data needs to be assigned to the ramdisk address (ramdisk_ptr), not
the physical address (ramdisk_addr).
As a result of the current behavior, we can no longer boot a kernel on
the Renesas R-Car S4 board.
Add an additional check to the if clause so that the ramdisk address is
assigned when the kernel address and the ramdisk address are the same,
restoring the previous default behavior.
Fixes: 21e7fa0e3a ("image: android: handle ramdisk default address")
Signed-off-by: Eddie Kovsky <ekovsky@redhat.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
Tested-by: Mattijs Korpershoek <mkorpershoek@kernel.org> # khadas vim3
When building with only bootz command, without bootm, images pointer
inside bootm_info structure is not initialized. And since this structure
is stored in stack, the generated error is kind of random, but most of
the time this will generate: "ramdisk - allocation error".
Also, after analysis, this problem could occur with the command booti,
if the command bootm is disabled.
Currently bootm_init() is called by: do_bootz(), do_bootm(), do_booti()
and by do_stm32prog(). And all of these commands execute bootm_run_states()
which access the images pointer stored into bootm_info structure.
So, to fix this issue, just do the assignment unconditionally.
Fixes: c2211ff651 ("bootm: Add more fields to bootm_info")
Signed-off-by: Benjamin ROBIN <dev@benjarobin.fr>
Reviewed-by: Tom Rini <trini@konsulko.com>
When lwIP (CONFIG_NET_LWIP) is used instead of legacy stack (CONFIG_NET),
environment flags support associated with network was not built: restore
support of "i" and "m" environment flags.
Signed-off-by: Benjamin ROBIN <dev@benjarobin.fr>
Acked-by: Jerome Forissier <jerome.forissier@linaro.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
The .scmversion is used by oe-core to append U-Boot version string.
LOCALVERSION is not fully compatible replacement as it adds trailing
"-dirty" string at the end of version string in case the U-Boot git
tree contains uncommitted changes. This behavior itself is correct.
However, OE builds do clone U-Boot sources from git and may apply
additional patches on top, which are not tracked in U-Boot git tree,
but rather in the OE metalayer git tree, which leads to the addition
of "-dirty" string as well.
The .scmversion used by oe-core used to replace the version string
suffix fully, including the "-dirty" string. Reinstate support for
the .scmversion to let OE core do exactly that as it used to do it.
Fixes: 5c02350fa0 ("scripts/setlocalversion: sync with linux v6.9")
Signed-off-by: Marek Vasut <marex@denx.de>
Enable CONFIG_SERIAL_RX_BUFFER on all Renesas R-Car devices which
use the SCIF serial port. This allows receiving large strings at
bulk even if the RX FIFO is small and would otherwise overflow.
The usual trigger for the problem addressed here is a paste of a
very long command into U-Boot command line, somewhere between 400
and 500 characters long. The trailing end of the string is usually
not received and the command line input stops responding due to RX
overflow errors. The CONFIG_SERIAL_RX_BUFFER allows efficient read
of data from the RX FIFO, which prevents the overflow, and allows
safe reception of long pasted strings.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
The issue here is that the function read_allocated_block() will report
problems via a negative return value. If we say the return value is
stored in an lbaint_t that can no longer happen (and Coverity discovered
this by reporting a no effect comparison and then dead code). The
problem being fixed by allowing for storing a larger block number will
have to be solved in some other manner.
This reverts commit df2ed552f0.
Addresses-Coverity-ID: 131183
Signed-off-by: Tom Rini <trini@konsulko.com>
Pull request efi-2025-07-rc3-3
CI:
* https://source.denx.de/u-boot/custodians/u-boot-efi/-/pipelines/26313
UEFI:
* run dhcp if an http boot option is selected
* separate device path into its own header and add it to the API docs
* rename END to EFI_DP_END
* make x86 SMBIOS tables usable in the EFI context
The way we enable ULPI support today isn't something that should work.
The "optional" keyword in a choice statement is not a documented
feature. To make this work in a supported way, make USB_ULPI something
we ask about if USB_HOST is set. Next, we move the choice of what
viewer to use to be after the framework portion and to depend on that.
We then borrow a few words from the top-level README to make the help
text here clearer. Finally we make the Qualcomm driver select ULPI as
it's required and we make the tegra driver not duplicate a check that
Kconfig now handles for us.
Signed-off-by: Tom Rini <trini@konsulko.com>
The last platform to enable this driver was removed in 2019. Remove this
unused code and documentation now.
Signed-off-by: Tom Rini <trini@konsulko.com>
dwc3_core_init loops 'timeout' times to check if the IP block is out
of reset using 'while (timeout--)'. If there is some issue and
the block doesn't come out of reset, the loop will run till
'timeout' becomes zero and the post decrement operator would set
timeout to 0xffffffff. Though the IP block is not out reset, the
subsequent if check 'if !timeout' would fail as timeout is not
equal to zero and the function proceeds with the initialization.
Use poll API instead to resolve this.
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
The EFI boot manager relies on having an IP address before trying to
boot an EFI HTTP(s) boot entry. However, defining it as a boot or
pre-boot command is not always the right answer since it will
unconditionally add delay to the board boot, even if we don't boot
over the network.
So let's do a DHCP request from the boot manager, if 'ipaddr' is
empty and fail early if we don't have an address.
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Tested-by: Michal Simek <michal.simek@amd.com>
